What is the Installation Height and Location for ADA Signs?

703.4.1 Height Above Finish Floor or Ground

Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches (1525 mm) maximum above the finish floor or ground surface, measured from the baseline of the highest tactile character.
EXCEPTION:Tactile characters for elevator car controls shall not be required to comply with 703.4.1.

703.4.1 Height of Tactile Characters above finish floor or ground for ada signs
703.4.1 Height of Tactile Characters above finish floor or ground for ada signs

703.4.2 Location

Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the sign shall be located on the inactive leaf. Where a tactile sign is provided at double doors with two active leafs, the sign shall be located to the right of the right hand door. Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall. Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position and 45 degree open position.
EXCEPTION:Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices.

703.4.2 Location of ADA Signs
Leave a Reply

Your email address will not be published. Required fields are marked *